Content reviewed September 30, 2026
Pinellas County pool permits are issued by the city or by the county department that actually has the parcel, and two houses a mile apart can sit in different review queues. Hive Outdoor Living, license CPC1458419, files where the parcel lives. Gulf exposure, flood zone, and salt air change the equipment and the enclosure even when the pool shape matches an inland Hillsborough job. The phone number is (813) 579-2444.
A patchwork of building departments
St. Petersburg, Clearwater, Largo, Dunedin, and several smaller municipalities issue their own pool permits. Other parcels go through Pinellas County building development. Fee schedules and inspection calendars do not match across those counters. Hive does not file based on the nearest city label on a map. The property record decides the queue, the same way it does in Hillsborough, but the number of possible queues is higher because the county is carved into many cities.
Barrier-island towns — Madeira Beach, Treasure Island, St. Pete Beach, Indian Rocks Beach, Indian Shores, the Redingtons, Belleair Beach — are not a marketing variant of Clearwater. Several of them are their own municipalities. A remodel or a new shell there can also sit in a FEMA AE or VE flood zone, which changes the equipment pad elevation and the enclosure design before anyone talks about tile.
That is the reason this page exists separately from a Tampa page. Substituting the word Pinellas into a Hillsborough article would skip the municipal split and the salt. Homeowners who bookmarked an old St. Petersburg remodeling URL are sent to the remodeling service, and they can read the jurisdiction rules here.
Sand, fill, and flood zones
Coastal Pinellas lots often combine sandy soils, a high water table, and, on filled or dredged parcels, inconsistent bearing. A shell designed for a native sand lot can need a different structural conversation on a lot that was created with fill. Hive treats bearing as site-specific. The excavator is not the person who discovers the assumption was wrong, because the proposal is written after the visit.
Flood zone is a design input, not a footnote. Equipment that sits below the required elevation fails inspection and fails the next surge. Pads, bond beams, and enclosure posts are set to the elevation the parcel's zone requires. Inland Pinellas, around a place such as Seminole or a higher Dunedin lot, may not carry the same zone as a gulf-front parcel. The county name does not unify them.
Access is tight on the islands. Gunite trucks, steel, and dumpsters have to fit streets that were not planned as construction staging. A design that looks right on a wide lot is rejected on a site visit when the truck cannot make the corner. Hive would rather lose the drawing in the driveway than lose a week after demolition.
Salt air, wind, and the Coastal Construction Control Line
Salt spray and brackish air accelerate corrosion on heaters, fasteners, and screen hardware. An equipment package that is reasonable in Plant City or Lakeland is the wrong spec on Clearwater Beach or Belleair Beach. Covers, materials, and how the pad is detailed differ even when the waterline shape is identical. This is the main physical difference between a Pinellas install and an inland one.
Gulf-front and barrier-island sites also see higher design wind speeds on the Florida Building Code and ASCE 7 maps than inland Pinellas. Screen enclosures, bond beams, and equipment tie-downs are engineered to the site's map value, not a county-wide average. Hillsborough's note that it sits outside the High-Velocity Hurricane Zone is true and still not a wind number you can borrow for a gulf lot.
Gulf-front work can trigger Coastal Construction Control Line review under the Florida Department of Environmental Protection in addition to the local building permit. That is a second agency and a second calendar. Chapter 515 barrier rules still apply on every residential pool, CCCL or not. If the lot is seaward of the line, Hive says so before the local permit is treated as the only approval.
Weather windows on the Gulf
Afternoon sea-breeze storms and hurricane-season surge planning matter more here than they do inland. Open excavations and uncured shells are protected when a tropical system enters the Gulf. The season still runs June 1 through November 30, but the operational difference is surge and the speed of gulf storms, not just rainfall totals.
Fill water and cure chemistry still matter, and salt air does not replace them. A new interior on a Madeira Beach remodel follows the same cure discipline as a Tampa plaster job, then lives in a harsher equipment environment afterward. Startup instructions are written for the pad the homeowner will actually maintain, including rinsing hardware that inland owners can ignore.
Where the commercial quote lives
Hive builds new gunite pools and remodels existing gunite pools in Pinellas under the same license used in the other four counties. There is no Pinellas storefront. The shop is at 7606 N. Nebraska Ave. in Tampa. Communities in the service list include St. Petersburg, Clearwater, Largo, Dunedin, Palm Harbor, Tarpon Springs, Safety Harbor, Oldsmar, and the barrier islands named above.
A homeowner who wants a price should open the new pool construction page or the remodeling page, then use this guide to see which office will review the plans. Child-safety barriers that HOAs or the statute require are documented with the permit; the child-safety gallery shows the product, and this page states the legal reason it is in the set.
New shells and remodels are both Pinellas jobs
A new gunite pool in Clearwater and a resurface on Madeira Beach share a license and do not share a scope. The new shell is quoted as construction. The existing shell is quoted as remodeling. On the islands, the remodel visit spends extra time on the flood-zone elevation of the pad and on corrosion that has already started. Inland, in a place such as Pinellas Park or a higher Largo lot, the visit spends that time on setbacks and access instead.
Salt does not wait for the shell to age. Heaters and screens installed with inland hardware show it within a few seasons on the Gulf. Hive writes the equipment spec for the parcel's exposure at the time of the contract. Replacing that equipment later is a remodeling line item, and it costs more than specifying it while the pad is being built.
If your lot may be seaward of the Coastal Construction Control Line, say so at the first call. DEP review is not something to discover after the municipal reviewer has already marked up a set that cannot be built on that side of the line. Hive will tell you if the local permit is the only approval or if the second agency is in the calendar.
The company does not staff a separate crew for each Pinellas city. St. Petersburg, Clearwater, and the beaches are the same contractor, CPC1458419, driving from the Tampa shop. What you should see change from city to city is the reviewer, the wind value, and the flood zone — and those are written here so they are not faked as separate businesses.
Bring the elevation certificate if you have one, especially on the barrier islands. Equipment height is not a guess Hive wants to make from the street. If the certificate and the flood zone disagree with a neighbor's pool, the neighbor's pool is not the standard. The parcel in front of the designer is the standard, and the municipal reviewer will use that record.
Pinellas municipal calendars also slip in summer when gulf storms stack inspections. A Clearwater final and a St. Petersburg final are different phone calls. Hive tracks the office named on your permit card. If you already started a file yourself, send that permit number before the visit so the company is joining your application instead of opening a second one.
Pinellas County's building development site covers the unincorporated queue only. It does not cover a St. Petersburg, Clearwater, Largo, or Dunedin permit, and it does not cover a barrier-island municipality. Match the portal to the city on the property appraiser card before you upload anything. Hive prepares that match as part of the visit. The shell you are buying is still described on the construction page, and an existing shell is still described on the remodeling page.
Questions homeowners ask
Which Pinellas office permits my pool?
- St. Petersburg, Clearwater, Largo, Dunedin, and several smaller cities issue their own permits. Other parcels use Pinellas County. Hive files from the parcel record, not from the city name in a listing.
Do gulf-front pools need more than a local building permit?
- They can. Lots seaward of the Coastal Construction Control Line may also need Florida DEP review. Flood zone still sets equipment elevation either way.
Why is Pinellas equipment specified differently from Tampa?
- Salt spray corrodes heaters, fasteners, and screen hardware. Inland hardware specs are not copied onto barrier-island pads.
Does Hive have an office in St. Petersburg or Clearwater?
- No. The shop is at 7606 N. Nebraska Ave., Tampa, FL 33604. Pinellas is part of the service area, not a second company.

